Duct Fittings

Directional Dampers

 Compare (0) Clear All

Click the tick to compare up to 5 products

  Print this Page

    Features

    Allows airflow to be controlled in an automatic or manual manner by restricting the flow of air in either a straight duct or in a T-join.

  • T-Branch Damper
    DCT1495_DCT1500
    Metric Size (mm)Order Code
    150mmDCT1495
    200mmDCT1500

    Click on a blue Order Code to view Compliance Document

    • Standard 240V Drive Open, Drive Close (D.O.D.C) motor attached.
    • Manufactured from ABS plastic.
    • Single damper motor & paddle control to direct airflow into or from selected branch.
    • Designed for both dual supply air and extract air applications.
    • Aesthetic smooth lines.
  • Motorised Barrel Damper
    DCT1168
    Metric Size (mm)Order Code
    150mmDCT1168
    200mmDCT1123
    250mmDCT1124
    300mmDCT1125
    350mmDCT1126
    400mmDCT1127

    Click on a blue Order Code to view Compliance Document

    • Standard 240V Drive Open, Drive Close (D.O.D.C) motor attached.
    • Other voltages available upon request.
    • Manufactured from HDPE.
    • Braced for strength with 2 x 6mm steel rod rings.
    • 100% positive shut off and positive lock duct tabs.
    • Insulation meets AS 1530 part 3.
    • Note: These are insulated.
  • Manual Barrel Damper
    DCT0787-DCT0706-DCT0788
    Metric Size (mm)Order Code
    150mmDCT0787
    200mmDCT0706
    250mmDCT0788
    300mmDCT2706
    350mm
    400mm

    Click on a blue Order Code to view Compliance Document

    • Manufactured from HDPE.
    • Complete with hand quadrant.
    • Braced for strength with 2 x 6mm steel rod rings.
    • Positive lock duct tabs.
    • Insulation meets AS 1530 part 3.
    • Note: These are insulated.